The bathroom is one of the rooms in your home that are frequently visited by people so, How Do You Clean Touch Points?. In fact, studies have shown that the average person spends about five minutes in the bathroom. When they step into your home, it is possible that germs from hand cleansers or other personal care products may be transferred to the sink, where they get trapped between the handle and the tap handle. If this is happening, there are some simple actions you can take to ensure proper indoor air quality.
First, it is important to thoroughly rinse the sink area after each use. Using a kitchen sponge or a soft towel, blot the sink until the water runs clear. If the sink tap or dish-washing detergent is left on, you will spread the solution around. Removing the soap or detergent from the surface of the sink or dishwasher is important because of its abrasiveness. You may want to consider using a non-alkaline cleaner or dish-washing detergent to disinfect the sink.
Why you should clean the kitchen sink after all?
When you are finished rinsing the sink, you should clean the tap handle as well. On some sinks, the handle locks into place at the tap’s end. To loosen the grip, tap the handle firmly. If it does not budge, you should use a cleaning solution or a metal scouring pad to scrape off the mineral buildup.
Once the sink and handle are free of mineral build-up, you should wipe the sink area with a sponge that has been soaked in cleaning solution. Check this Naturally Green Cleaning tutorials. Use a cotton rag to dab at the sink until all soap and detergent suds are removed. If baking soda is present on the sink, blotting the area is not a good idea because it could further corrode the faucet. In addition, too much baking soda can dissolve the faucet seal. You should also note that this step cannot be done if you have a spray faucet because of its constant exposed water.
How do you clean your kitchen?
Rinse the sink again and let it dry. Use hot water to rinse the sink again and then let it dry completely. To test for soap residue, place a drop of vinegar in a bowl and wait for it to dry. If the bowl is visibly wet, you can assume that there is some soap left behind. You can then use a scrubbing pad or clean cloth to clean the rest of the surface.
When soap residue becomes noticeable, you should clean the rest of the surface using a scrubbing pad or a scrubbing brush. This way, you will get rid of the remaining soap residue and any residue that was left behind by the previous cleaning solution. Again, if the baking soda-soaked rag or scouring pad seems to be too harsh, you can use a small amount of dish washing liquid as a substitute. Just make sure that it is only slightly diluted.
How often do I need to clean touch points?
If the problem persists despite your repeated attempts, then it is time to take it to the professionals. Visit a plumber or a bathroom appliance repairman to have the broken device repaired. Watch this Naturally Green Cleaning scrubbing surfaces. They will be able to provide you with the right tools for the job. However, be prepared to pay at least a couple of hundred dollars. If you cannot afford this amount, you can always try repairing the device on your own.
When you find out how do you clean touch points, you might not have to wonder the same thing when it comes to your own devices. At least, you will know how to solve minor issues such as drips and leaks without calling in professional help. So start learning how to properly take care of the maintenance of your kitchen appliances today. That way, you can enjoy long life and more functionality from them.